MK3/S/+ Spring Steel Sheets (Local Shipping in Canada)
MK3/S/+ Spring Steel Sheets (Local Shipping in Canada)
MK3/S/+ Spring Steel Sheets (Local Shipping in Canada)
  • Load image into Gallery viewer, MK3/S/+ Spring Steel Sheets (Local Shipping in Canada)
  • Load image into Gallery viewer, MK3/S/+ Spring Steel Sheets (Local Shipping in Canada)
  • Load image into Gallery viewer, MK3/S/+ Spring Steel Sheets (Local Shipping in Canada)

MK3/S/+ Spring Steel Sheets (Local Shipping in Canada)

Toronto's local Prusa distributor. Select "Pick up" at checkout to waive all shipping fees and pick up your items in Mississauga.

There are three sheet options, each broken down below:
1. Double-sided textured PEI powder-coated spring steel sheet
2. Double-sided satin powder-coated PEI spring steel sheet
3. Double-sided smooth PEI spring steel sheet

Not compatible with the MK2.5S, MK2.5, MK2S, MK2, MMU2S, CW1, CW1S, SL1, SL1S, MINI, or MINI+. 

Double-sided Textured PEI Powder-coated Spring Steel Sheet

Overview: The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.

Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on our print farm, look at the printed parts you have on your printer for reference.

Warning: Never clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time. 

Attributes:

  • Scratchproof, hard to damage
  • Transfers texture to prints
  • More forgiving Live Adjust Z setting
  • No need for Windex with PETG
  • No need for glue stick with FLEX
  • Prints automatically detach after sheet cools down
  • First layer can be more squished compared to smooth sheets
  • PLA prints with a small contact area may need a brim
  • PLA prints with a huge footprint may warp
  • Need to change Live Adjust Z if you also own Smooth PEI sheet
  • Never clean with acetone

 

Double-sided Satin Powder-coated PEI Spring Steel Sheet

Overview: The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.

The Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).

Polycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.

Warning: Never clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. 

Attributes:

  • Suitable for both PLA and PETG
  • Lightly textured surface finish
  • No need for Windex for PETG
  • No need for glue stick with FlexFill 98A
  • Wide range of supported filaments, including advanced materials, for instance PC Blend
  • Easy maintenance and good adhesion qualities
  • Acetone causes the surface to quickly deteriorate
  • Prints from ASA, PC Blend require a brim / skirt / shield around the print
  • Live Z value needs to be readjusted if you switch sheets
  • Do not use sharp metal objects (e.g. a spatula) to remove the print!

 

Double-sided Smooth PEI Spring Steel Sheet

Overview: The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets. The Spring Steel Sheet With Smooth Double-sided PEI uses the same PEI sheets as on the MK2/S. It is the best solution for printing PLA and it has great adhesion with almost all materials. The bottom of your prints will be smooth.

You can leave small marks on the print surface with your nozzle or tools, they will typically be shinier than the rest. It does not affect functionality or adhesion. However, if you want to have the same surface look on the whole printbed you can resurface it. The easiest way is to take the hard side of a dry kitchen sponge and wipe the affected area with a circular motion gently a few times.

Attributes:

  • Perfect for PLA
  • Great adhesion with almost all materials
  • Smooth bottom of prints
  • Tiny details will stick great
  • Do not clean with IPA before PETG
  • Release agent might be necessary
  • You must apply glue stick when printing Flex 
Vendor
VoxelPrints
Regular price
$53.99
Sale price
$53.99
Regular price
Sold out
Unit price
per