MINI/+ Spring Steel Sheets (Local Shipping in Canada)

Toronto's local Prusa distributor. Select "Pick up" at checkout to waive all shipping fees and pick up your items in Mississauga.

There are three sheet options, each broken down below:
1. Double-sided textured PEI powder-coated spring steel sheet
2. Double-sided satin powder-coated PEI spring steel sheet
3. Double-sided smooth PEI spring steel sheet

Not compatible with the MK2.5S, MK2.5, MK2S, MK2, MMU2S, CW1, CW1S, SL1, SL1S, MK3S, MK3S+, or MK3. 

Double-sided Textured PEI Powder-coated Spring Steel Sheet

This product is the replacement Double-sided Textured PEI Powder-coated Spring Steel Sheet for the Original Prusa MINI heatbed.

Overview: The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets. Powder coating directly on metal makes it very hard to damage this build plate. If a heated nozzle crashed into it, the metal can dissipate the heat. Powder coating also gives the surface a distinct textured look that will be visible on your prints. The textured surface hides most of the mechanical damage caused by tools. Only the top of the small bumps can be scratched, which will not imprint on the bottom of the model. This surface is used on our print farm, look at the printed parts you have on your printer for reference.

Warning: Never clean the Textured PEI Powder-coated spring steel sheet with acetone! Doing so will create microfractures in the PEI texture, which will make the surface deteriorate over time.

Attributes:

  Double-sided Satin Powder-coated PEI Spring Steel Sheet

Double-sided satin powder-coated spring steel sheet for the Original Prusa MINI/+.

Overview: The MK52 heatbed has embedded high Curie temperature magnets. These magnets are able to firmly hold removable spring steel sheets.

The Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).

Polycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.

Warning: Never clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time.

Attributes:

Double-sided Smooth PEI Spring Steel Sheet

This product is the replacement Spring Steel Sheet With Smooth Double-sided PEI for the Original Prusa MINI heatbed.

Attributes: